From 16e2a04842c31fd689ba34c0f166ecb7435cc178 Mon Sep 17 00:00:00 2001
From: Franco Fichtner <franco@opnsense.org>
Date: Tue, 9 Dec 2014 15:27:21 +0100
Subject: [PATCH] etc: gettytab is critical

---
 etc/gettytab            | 235 -------------------------------------
 usr/local/etc/rc.cdrom  |   7 +-
 usr/local/installer/pfi | 252 ----------------------------------------
 3 files changed, 1 insertion(+), 493 deletions(-)
 delete mode 100644 etc/gettytab
 delete mode 100755 usr/local/installer/pfi

diff --git a/etc/gettytab b/etc/gettytab
deleted file mode 100644
index 5af5aaede..000000000
--- a/etc/gettytab
+++ /dev/null
@@ -1,235 +0,0 @@
-# $FreeBSD: stable/10/etc/gettytab 241708 2012-10-18 22:20:02Z peterj $
-#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
-#
-# Most of the table entries here are just copies of the old getty table,
-# it is by no means certain, or even likely, that any of them are optimal
-# for any purpose whatever.  Nor is it likely that more than a couple are
-# even correct.
-#
-# The default gettytab entry, used to set defaults for all other
-# entries, and in cases where getty is called with no table name.
-#
-# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
-# be changed to turn them off (:cb@:ce@:ck@:).
-#
-# lc should always be on; it's a remainder of some stone age when there
-# have been terminals around not being able of handling lower-case
-# characters. Those terminals aren't supported any longer, but getty is
-# `smart' about them by default.
-#
-# Parity defaults to even, but the Pc entry and all the `std' entries
-# specify no parity.   The different parities are:
-#     (none): same as ep for getty.  login will use terminal as is.
-#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
-#             fake parity.  login will use even parity (cs7 parenb -parodd).
-#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
-#             getty will fake odd parity as well.
-#     ap:     same as ep except -inpck instead of inpck for login.
-#             ap overrides op and ep.
-#     np:     1. don't fake parity in getty.  The fake parity garbles
-#                characters on non-terminals (like pccons) that don't
-#                support parity.  It would probably better for getty not to
-#                try to fake parity.  It could just use cbreak mode so as
-#                not to force cs8 and let the hardware handle the parity.
-#                login has to be rely on the hardware anyway.
-#             2. set cs8 -parenb -istrip -inpck.
-#     ep:op:  same as ap.
-#
-default:\
-	:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
-	:if=/etc/issue:
-
-#
-# Fixed speed entries
-#
-#	The "std.NNN" names are known to the special case
-#	portselector code in getty, however they can
-#	be assigned to any table desired.
-#	The "NNN-baud" names are known to the special case
-#	autobaud code in getty, and likewise can
-#	be assigned to any table desired (hopefully the same speed).
-#
-a|std.110|110-baud:\
-	:np:nd#1:cd#1:uc:sp#110:
-b|std.134|134.5-baud:\
-	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
-1|std.150|150-baud:\
-	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
-c|std.300|300-baud:\
-	:np:nd#1:cd#1:sp#300:
-d|std.600|600-baud:\
-	:np:nd#1:cd#1:sp#600:
-f|std.1200|1200-baud:\
-	:np:fd#1:sp#1200:
-6|std.2400|2400-baud:\
-	:np:sp#2400:
-7|std.4800|4800-baud:\
-	:np:sp#4800:
-2|std.9600|9600-baud:\
-	:np:sp#9600:
-g|std.19200|19200-baud:\
-	:np:sp#19200:
-std.38400|38400-baud:\
-	:np:sp#38400:
-std.57600|57600-baud:\
-	:np:sp#57600:
-std.115200|115200-baud:\
-	:np:sp#115200:
-std.230400|230400-baud:\
-	:np:sp#230400:
-
-#
-# Entry specifying explicit device settings.  See termios(4) and
-# /usr/include/termios.h, too.  The entry forces the tty into
-# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
-#
-# cflags: CLOCAL | HUPCL | CREAD | CS8
-# oflags: OPOST | ONLCR | OXTABS
-# iflags: IXOFF | IXON | ICRNL | IGNPAR
-# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
-#
-# The `0' flags don't have input enabled.  The `1' flags don't echo.
-# (Echoing is done inside getty itself.)
-#
-local.9600|CLOCAL tty @ 9600 Bd:\
-	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
-	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
-	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
-	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
-	:sp#9600:np:
-
-#
-# Dial in rotary tables, speed selection via 'break'
-#
-0|d300|Dial-300:\
-	:nx=d1200:cd#2:sp#300:
-d1200|Dial-1200:\
-	:nx=d150:fd#1:sp#1200:
-d150|Dial-150:\
-	:nx=d110:lm@:tc=150-baud:
-d110|Dial-110:\
-	:nx=d300:tc=300-baud:
-
-#
-# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
-#
-D2400|d2400|Fast-Dial-2400:\
-	:nx=D1200:tc=2400-baud:
-3|D1200|Fast-Dial-1200:\
-	:nx=D300:tc=1200-baud:
-5|D300|Fast-Dial-300:\
-	:nx=D2400:tc=300-baud:
-
-#
-#telebit (19200)
-#
-t19200:\
-	:nx=t2400:tc=19200-baud:
-t2400:\
-	:nx=t1200:tc=2400-baud:
-t1200:\
-	:nx=t19200:tc=1200-baud:
-
-#
-#telebit (9600)
-#
-t9600:\
-	:nx=t2400a:tc=9600-baud:
-t2400a:\
-	:nx=t1200a:tc=2400-baud:
-t1200a:\
-	:nx=t9600:tc=1200-baud:
-
-#
-# Odd special case terminals
-#
--|tty33|asr33|Pity the poor user of this beast:\
-	:tc=110-baud:
-
-4|Console|Console Decwriter II:\
-	:nd@:cd@:rw:tc=300-baud:
-
-e|Console-1200|Console Decwriter III:\
-	:fd@:nd@:cd@:rw:tc=1200-baud:
-
-i|Interdata console:\
-	:uc:sp#0:
-
-l|lsi chess terminal:\
-	:sp#300:
-
-X|Xwindow|X window system:\
-	:fd@:nd@:cd@:rw:sp#9600:
-
-P|Pc|Pc console:\
-	:ht:np:sp#9600:
-
-al.Pc:\
-	:ht:np:sp#9600:al=root:
-
-# Weirdo special case for fast crt's with hardcopy devices
-#
-8|T9600|CRT with hardcopy:\
-	:nx=T300:tc=9600-baud:
-9|T300|CRT with hardcopy (300):\
-	:nx=T9600:tc=300-baud:
-
-#
-# Plugboard, and misc other terminals
-#
-plug-9600|Plugboard-9600:\
-	:pf#1:tc=9600-baud:
-p|P9600|Plugboard-9600-rotary:\
-	:pf#1:nx=P300:tc=9600-baud:
-q|P300|Plugboard-300:\
-	:pf#1:nx=P1200:tc=300-baud:
-r|P1200|Plugboard-1200:\
-	:pf#1:nx=P9600:tc=1200-baud:
-
-#
-# XXXX Port selector
-#
-s|DSW|Port Selector:\
-	:ps:sp#2400:
-
-#
-# Auto-baud speed detect entry for Micom 600.
-# Special code in getty will switch this out
-# to one of the NNN-baud entries.
-#
-A|Auto-baud:\
-	:ab:sp#2400:f0#040:
-
-#
-# autologin - automatically log in as root
-#
-
-autologin|al.9600:\
-	:al=root:tc=std.9600:
-al.19200:\
-	:al=root:tc=std.19200:
-al.38400:\
-	:al=root:tc=std.38400:
-al.57600:\
-	:al=root:tc=std.57600:
-al.115200:\
-	:al=root:tc=std.115200:
-al.230400:\
-	:al=root:tc=std.230400:
-
-#
-# Entries for 3-wire serial terminals.  These don't supply carrier, so
-# clocal needs to be set, and crtscts needs to be unset.
-#
-3wire.9600|9600-3wire:\
-	:np:nc:sp#9600:
-3wire.19200|19200-3wire:\
-	:np:nc:sp#19200:
-3wire.38400|38400-3wire:\
-	:np:nc:sp#38400:
-3wire.57600|57600-3wire:\
-	:np:nc:sp#57600:
-3wire.115200|115200-3wire:\
-	:np:nc:sp#115200:
-3wire.230400|230400-3wire:\
-	:np:nc:sp#230400:
diff --git a/usr/local/etc/rc.cdrom b/usr/local/etc/rc.cdrom
index 4a85dc33f..cacaa1edd 100755
--- a/usr/local/etc/rc.cdrom
+++ b/usr/local/etc/rc.cdrom
@@ -14,12 +14,7 @@ for i in tmp varmfs etcmfs; do
        fi
 done
 
-# Start PFI
-/bin/sh /usr/local/installer/pfi start
-
-# If PFI did not find a config, we should create
-# a tiny mfs under /conf and populate with stock
-# configuration.
+# Add /conf and populate with stock configuration.
 if [ ! -f /conf/config.xml ]; then
        echo -n "Generating a MFS /conf partition... "
        device=$(mdconfig -a -t malloc -s ${partsize})
diff --git a/usr/local/installer/pfi b/usr/local/installer/pfi
deleted file mode 100755
index c1ce0d738..000000000
--- a/usr/local/installer/pfi
+++ /dev/null
@@ -1,252 +0,0 @@
-#!/bin/sh
-
-# $Id$
-# $DragonFly: src/nrelease/installer/etc/rc.d/pfi,v 1.2 2004/07/11 18:55:20 cpressey Exp $
-#
-
-# PROVIDE: pfi
-# REQUIRE: mountoptional
-# KEYWORD: FreeBSD
-
-. /etc/rc.subr
-
-name=pfi
-start_cmd="pfi_start"
-stop_cmd=":"
-thttpd_location="/scripts/thttpd"
-
-touch /etc/rc.conf
-
-get_config_xml()
-{
-	if [ -r $1/conf/config.xml ]; then
-		echo -n "[config.xml on $1]"
-		# Now that we have found config.xml lets mount
-		# the device in nullfs under /cf/conf and /conf
-		mount_nullfs /tmp/mnt/cf /cf
-		mount_nullfs /tmp/mnt/cf/conf /conf
-		if [ ! -r /cf/conf/config.xml ]; then
-			echo
-			echo "Something went wrong.  Launching shell!";
-			/bin/sh
-		fi
-		echo
-		return 0
-	else
-		return 1
-	fi
-}
-
-look_for_config_xml_config_msdos()
-{
-	mkdir -p /tmp/mnt/cf
-	echo -n "Looking for config.xml on "
-	for try_device in da0 da0s1 da1 da1s1 da2 da2s1 da3 da3s1 da4 da4s1 da5 da5s1 fd0 fd1; do
-		if [ ! -e /dev/${try_device} ]; then
-			continue
-		fi
-		echo -n "$try_device "
-		if mount -t msdos /dev/$try_device /tmp/mnt/cf 2>/dev/null ; then
-			echo -n "[found msdos] "
-			# Note for later that this device is capable
-			# of having config.xml on it for perm. storage
-			/bin/mkdir -p /var/db/pfi/
-			/usr/bin/touch /var/db/pfi/capable_${try_device}
-			# look for config.xml, if its found return 0
-			if get_config_xml /tmp/mnt/cf /dev/$try_device; then
-			    return 0
-			fi
-		fi
-	done
-	echo "done."
-	return 1
-}
-
-get_pfi_config()
-{
-	[ -r /etc/pfi.conf ] && return 0
-
-	if [ -r $1/pfi.conf ]; then
-		echo -n "Found pfi.conf on $1"
-		tr -d "\r" < $1/pfi.conf > /etc/pfi.conf
-		echo "pfi_found_on_device='$2'" >> /etc/pfi.conf
-		echo "#@@@@@" >>/etc/rc.conf
-		cat /etc/pfi.conf >>/etc/rc.conf
-		if [ -r /etc/defaults/pfi.conf ]; then
-			. /etc/defaults/pfi.conf
-		fi
-		. /etc/pfi.conf
-		if [ "$pfi_script" != "" -a -x "$1/$pfi_script" ]; then
-			$1/$pfi_script
-		fi
-		return 0
-	else
-		return 1
-	fi
-}
-
-get_authorized_hosts()
-{
-	[ -r /root/authorized_hosts ] && return 0
-	if [ -r $1/authorized_hosts ]; then
-		echo "Authorized_hosts found on $1"
-		mkdir -p ~root/.ssh/
-		tr -d "\r" < $1/authorized_hosts > /root/.ssh/authorized_hosts
-	fi
-}
-
-look_for_pfi_config_msdos()
-{
-	[ -r /etc/pfi.conf ] && return 0
-	echo -n "Looking for pfi.conf on "
-	for try_device in da0 da1 da0s1 da1s1 fd0 fd1; do
-		if [ ! -e /dev/${try_device} ]; then
-			continue
-		fi
-		echo -n "${try_device} "
-		if mount -t msdos -o rdonly /dev/$try_device /tmp/mnt 2>/dev/null ; then
-			echo -n "[found] "
-			get_authorized_hosts
-			if get_pfi_config /tmp/mnt /dev/$try_device; then
-				umount /tmp/mnt
-				echo -n "[found] "
-				return 0
-			fi
-			umount /tmp/mnt
-		fi
-	done
-	echo "done. "
-	return 1
-}
-
-look_for_pfi_config_cd9660()
-{
-	[ -r /etc/pfi.conf ] && return 0
-	echo -n "Looking for pfi.conf on "
-	for try_device in acd0c; do
-		echo -n "${try_device} "
-		if [ ! -e /dev/${try_device} ]; then
-			echo "done. "
-			return 1
-			#( cd /dev && ./MAKEDEV ${try_device} )
-		fi
-		if mount_cd9660 /dev/$try_device /tmp/mnt ; then
-			echo -n "[found] "
-			get_authorized_hosts
-			if get_pfi_config /tmp/mnt /dev/$try_device; then
-				umount /tmp/mnt
-				echo -n "[found]" 
-				return 0
-			fi
-			umount /tmp/mnt
-		fi
-	done
-	return 1
-}
-
-pfi_start()
-{
-
-	# Get the pfi.conf file off the pfi media and into /etc/pfi.conf.
-
-	look_for_pfi_config_cd9660
-	look_for_pfi_config_msdos
-        look_for_config_xml_config_msdos    # look for pfsense config.xml
-
-	if [ ! -r /etc/pfi.conf ]; then
-		echo '' >/etc/pfi.conf
-	fi
-
-	if [ -r /etc/defaults/pfi.conf ]; then
-		. /etc/defaults/pfi.conf
-	fi
-	. /etc/pfi.conf
-
-	# We can perform any pre-install tasks here by
-	# examining the contents of pfi_* variables.
-
-	# Interpret pfi_sshd_* options.  These basically add settings
-	# to /etc/ssh/sshd_config; it is assumed "sshd" will appear
-	# in pfi_rc_actions to restart sshd.
-
-	case ${pfi_sshd_permit_root_login} in
-	YES)
-		echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
-		;;
-	without-password)
-		echo "PermitRootLogin without-password" >> /etc/ssh/sshd_config
-		;;
-	forced-commands-only)
-		echo "PermitRootLogin forced-commands-only" >> /etc/ssh/sshd_config
-		;;
-	*)
-		;;
-	esac
-
-	case ${pfi_sshd_permit_empty_passwords} in
-	YES)
-		echo "PermitEmptyPasswords yes" >> /etc/ssh/sshd_config
-		;;
-	*)
-		;;
-	esac
-
-	# Interpret pfi_set_root_password.  If it is not empty, use
-	# it to set root's LiveCD password.
-
-	if [ "X$pfi_set_root_password" != "X" ]; then
-		echo "$pfi_set_root_password" | \
-		    /usr/sbin/pw usermod root -h 0
-	fi
-
-	# The most important pre-install task is to restart
-	# any RCNG scripts listed in pfi_rc_actions with any new
-	# settings that might have been set up by pfi.conf.
-
-	if [ "X$pfi_rc_actions" != "X" ]; then
-		rev_actions=`reverse_list $pfi_rc_actions`
-
-		for _rc_elem in ${rev_actions}; do
-			echo "Stopping ${_rc_elem}..."
-			/etc/rc.d/${_rc_elem} stop
-			#rcstop ${_rc_elem}
-		done
-		for _rc_elem in ${pfi_rc_actions}; do
-			echo "Starting ${_rc_elem}..."
-			/etc/rc.d/${_rc_elem} start
-			#rcstart ${_rc_elem}
-		done
-	fi
-
-	# Now remove the copy of pfi.conf that we tacked onto
-	# the end of rc.conf so the above would work
-
-	awk '$1=="#@@@@@" || cut { cut = 1 } !cut { print $0 }' \
-	    </etc/rc.conf >/etc/rc.conf.new
-	mv /etc/rc.conf.new /etc/rc.conf
-
-	# Set up auto-login if requested.
-
-	if [ "X$pfi_autologin" != "XNONE" ]; then
-		echo 'autologin|al.9600:\' >> /etc/gettytab
-		echo "        :al=${pfi_autologin}:tc=std.9600:" >> /etc/gettytab
-		sed -i '' 's/^ttyv0=.*/ttyv0 "\/usr\/libexec\/getty Al" cons25 on secure/' /etc/ttys
-	fi
-
-	# Finally, start thttpd if the user wants to use
-	# the cgi frontend.
-
-	if [ "X$pfi_frontend" = "Xcgi" ]; then
-		echo "Starting thttpd..."
-		echo dir=/usr/local/www > /tmp/thttpd.conf
-		echo user=root >> /tmp/thttpd.conf
-		echo cgipat=*.cgi >> /tmp/thttpd.conf
-		echo logfile=/var/log/thttpd.log >> /tmp/thttpd.conf
-		echo pidfile=/var/run/thttpd.pid >> /tmp/thttpd.conf
-		$thttpd_location -C /tmp/thttpd.conf
-	fi
-}
-
-load_rc_config $name
-run_rc_command "$1"
-